1734-OA2 Allen Bradley:
1734-OA2 Rockwell PLC Module Supply
The Allen-Bradley 1734-OA2 point I / O 120 to 240 volt AC output module is a digital output module with eight key switch positions and two non-isolated current outputs. The 1734-OA2 has an external DC power supply of 120 to 220 volts DC at 60 Hz and an isolation voltage of 240 volts AC, and has a reinforced insulation type that has been tested at 3,250 volts DC for 60 seconds from the field to the system. The 1734-OA2 has an open housing suitable for 2W power consumption at 264V AC and 6.8 BTU / hour heat dissipation at 264V AC. Using a 1734-TB, 1734-TBS, 1734-TOP, or 1734-TOPS wiring base assembly, mount the 1734-OA2 on the 7-inch terminal base screws with a 7-pound weight.
1734-OA2 has rated electrical characteristics. Its on-state voltage ranges from 120 to 220 volts AC, with a peak current of 264 volts AC. The on-state current of each channel is 10 mA, and the maximum of 1734-OA2 per channel is The on-current is 750mA. The voltage drop at 0.75mA is 1.0V, and the maximum leakage current at AC 264V is 2.7mA. The 1734-OA2 has a 16 amp surge current, lasts 100 milliseconds, repeats every 3 seconds, and has a signal delay of half a cycle. 1734-OA2 works well in the temperature range of -4 to 131 degrees Fahrenheit, but for any temperature value exceeding 55 degrees Celsius, it will steadily decrease by 13% at a time. It has a storage temperature range of -40 to 185 degrees Fahrenheit and a non-condensing relative humidity of 5 to 95%. At a frequency of 10 to 500 Hz, the 1734-OA2 has an operating shock rate of 30G and a maximum vibration of 5G.
WHY CHOOSE US?
More than 10 years exporting experience for industrial automation products!
NEVER SALE Broken PARTs is our mission! We taking this mission and continue to implement it always!
100% Full new original factory sealed parts.
Thousands of Parts in Stock!
3 warehouses and safety stock 2.5 million USD Allen Bradley Parts!
