1734-OE2V:
1734-OE2V Rockwell PLC Module Supply
The Allen-Bradley 1734-OE2V POINT I / O analog output module is located in the 4-key switch position. The 1734-OE2V is an analog output module with a 2-channel module that converts digital output voltage to analog output voltage. The 1734-OE2V is in a unipolar or bipolar module with a resolution of 14 bits (13 plus) of 1.28C / cnt. Before the communication is set, its output voltage is 0V. User-configurable output voltage is 0-10V. (Below -0.0V, + 0.5V or more) + 10V user configurable (below -0.5V, + 0.5V or more). The 1734-OE2V operates unipolar or bipolar modules. 1734-OE2V default module mode is 0-10V DC, typical mode is -10- + 10V DC. Its default zoom point is 0-10000. The module has 2 single-ended non-isolated current I / Os. The absolute accuracy of 1734-OE2V is 0.1% of full scale at 25 ° C. Its accuracy changes with temperature is 5ppm / ° C.
The 1734-OE2V Allen-Bradley has a 3 mA current load on the voltage output of the digital-to-analog conversion type. The 1734-OE2V has a conversion rate of 20 μs and is factory-calibrated in a signed integer format. At 5V DC, the maximum point bus current is 75 mA, and the maximum power consumption is 1W.
The 1734-OE2V has a heat output of 3.4 BTU / hour. The 1734-OE2V has a continuous isolation voltage of 50V, and the module has been tested to withstand 2200V DC for 60 s. It has a nominal voltage of 24V DC and a voltage range of 10-28.8V DC. At 24V DC, its current supply is 35 mA, including a 3mA output.
The 1734-OE2V has multiple indicators: 1 green / red indicates module status, 1 green / red indicates network status, and 2 green / red indicates output status. Its dimensions are 56 x 12 x 75.5 mm. On the signal port, the wire category is 1 –. The wire size of the model is 0.25-2.5 mm2 solid or stranded copper wire, the rated temperature is 75 ° C or higher, and the maximum insulation value is 1.2 mm. The weight of 1734-OE2V is about 36g, and the mass of the terminal base screw torque is 0.6 Nm. Its working temperature is -20-55 ° C, the upper limit temperature of the surrounding air is 55 ° C, and the storage temperature is -40-85 ° C. The relative humidity of 1734-OE2V is 5-95% (non-condensing), and the vibration is 5g at 10-500 Hz. Its operating impact is 30 grams and its non-operational impact is 50 grams. Before establishing communication, the 1734-OE2V module produces a 0 volt output. After the communication is established, the output voltage can be configured by the user and the range is 0-10V. In addition, the current load on the voltage output of the 1734-OE2V module is 3 mA.
The Allen-Bradley 1734-OE2V POINT I / O analog output module is located in the 4-key switch position. The 1734-OE2V is an analog output module with a 2-channel module that converts digital output voltage to analog output voltage. The 1734-OE2V is in a unipolar or bipolar module with a resolution of 14 bits (13 plus) of 1.28C / cnt. Before the communication is set, its output voltage is 0V. User-configurable output voltage is 0-10V. (Below -0.0V, + 0.5V or more) + 10V user configurable (below -0.5V, + 0.5V or more). The 1734-OE2V operates unipolar or bipolar modules. 1734-OE2V default module mode is 0-10V DC, typical mode is -10- + 10V DC. Its default zoom point is 0-10000. The module has 2 single-ended non-isolated current I / Os. The absolute accuracy of 1734-OE2V is 0.1% of full scale at 25 ° C. Its accuracy changes with temperature is 5ppm / ° C.
The 1734-OE2V Allen-Bradley has a 3 mA current load on the voltage output of the digital-to-analog conversion type. The 1734-OE2V has a conversion rate of 20 μs and is factory-calibrated in a signed integer format. At 5V DC, the maximum point bus current is 75 mA, and the maximum power consumption is 1W.
The 1734-OE2V has a heat output of 3.4 BTU / hour. The 1734-OE2V has a continuous isolation voltage of 50V, and the module has been tested to withstand 2200V DC for 60 s. It has a nominal voltage of 24V DC and a voltage range of 10-28.8V DC. At 24V DC, its current supply is 35 mA, including a 3mA output.
The 1734-OE2V has multiple indicators: 1 green / red indicates module status, 1 green / red indicates network status, and 2 green / red indicates output status. Its dimensions are 56 x 12 x 75.5 mm. On the signal port, the wire category is 1 –. The wire size of the model is 0.25-2.5 mm2 solid or stranded copper wire, the rated temperature is 75 ° C or higher, and the maximum insulation value is 1.2 mm. The weight of 1734-OE2V is about 36g, and the mass of the terminal base screw torque is 0.6 Nm. Its working temperature is -20-55 ° C, the upper limit temperature of the surrounding air is 55 ° C, and the storage temperature is -40-85 ° C. The relative humidity of 1734-OE2V is 5-95% (non-condensing), and the vibration is 5g at 10-500 Hz. Its operating impact is 30 grams and its non-operational impact is 50 grams. Before establishing communication, the 1734-OE2V module produces a 0 volt output. After the communication is established, the output voltage can be configured by the user and the range is 0-10V. In addition, the current load on the voltage output of the 1734-OE2V module is 3 mA.
Why Choose us
WHY CHOOSE US?
-
Company
More than 10 years exporting experience for industrial automation products!
-
Quality
NEVER SALE Broken PARTs is our mission! We taking this mission and continue to implement it always!
100% Full new original factory sealed parts. -
Ample inventory
Thousands of Parts in Stock!
3 warehouses and safety stock 2.5 million USD Allen Bradley Parts!